AutoCAD_2013_32bit+64bit_繁體中文版

evolsseldne

後面這幾版越做越office了XD 不過基本功能都一樣 只是可以更懶人化

carson0

我碰到了一個註冊問題!!
我的畫面是這樣，如下:

請問如何解決?

chislide

carson0 發表於 2012-5-12 17:56
我碰到了一個註冊問題!!
我的畫面是這樣，如下:

1.Install Autodesk Autocad 2013

2.Use as Serial 666-69696969, 667-98989898, 400-45454545 066-66666666 ..
  or anything matching those templates

3.Use as Product Key 001E1
  
4.Finish the installation & restart Autodesk Product

5.Before clicking on Activate
  You have 2 options :
   - a) Disable Your network Card, pull the network cable out or block with firewall
     (this is just to disable online serial check)
OR
   - b) Click on Activate and it will tell you that your serial is wrong, simply click
     on close and click on activate again.

Choose option a or b.

6. Select I have an activation code from Autodesk
   
7.Once at the activation screen:
  start XFORCE Keygen 32bits version or 64bits version
  
8.Click on Mem Patch (you should see successfully patched)

9.Copy the request code into the keygen and press generate

10.Now copy the activation code back to the activation screen and click Next
  You have a fully registered autodesk product



NB: Make sure you are running the Keygen as administrator and with UAC off on Windows7
    And use the keygen for the right Product

carson0

chislide 發表於 2012-5-12 20:18
1.Install Autodesk Autocad 2013

2.Use as Serial 666-69696969, 667-98989898, 400-45454545 066-6666 ...

感謝您，問題已解決!!

再來是想請問一下，目前有 Windows 8 安裝 X64 會中途跳出的解決方法嗎??

chislide

carson0 發表於 2012-5-12 22:40
感謝您，問題已解決!!

再來是想請問一下，目前有 Windows 8 安裝 X64 會中途跳出的解決方法嗎?? ...

Windows 8 ConsumerPreview 安裝只要DVD光碟片 燒錄完整成功 安裝並無彈出視窗問題。



PS：燒錄建議使用UltraISO軟體內建燒錄功能直接燒錄至 DVD光碟，燒錄成功機率100%。

z90141123

近期需要用到繪3D圖,剛好需要用到
謝謝版主分享
來試用看看

chislide

rc10 發表於 2013-1-12 20:36
報告 chislide

autocad 2013 的主程式載點掛掉了!

檔案下載正常