|
本帖最後由 maodou 於 2018-4-21 10:25 編輯
(我沒有試過用異機還原到在MBR UEFI的Windows 10, 不過可以參考底下步驟試試看...)
Acronis True Image 2018:如何還原到不同的硬體 <-- 完整內容在此
應用通用恢復到Windows操作系統之前,請確保您有新的硬盤控制器和芯片組的驅動程序。這些驅動程序是至關重要的啟動操作系統。使用硬件供應商提供的CD或DVD,或從銷售商的網站下載驅動程序。該驅動程序文件應為* .inf,*。sys或* .oem擴展。如果你下載的驅動程序為* .exe,*。cab或* .zip格式,使用第三方應用程序(如自由提取出來 的7-Zip工具或任何其他)。
一旦你手頭上有必要的驅動程序,您需要將它們放置到一個位置Acronis可啟動媒體可以訪問,例如:
- 它們添加到啟動媒體,而在啟動媒體生成器創建它如在步驟3中所描述
- 將它們放置在USB棒或外部驅動器和應用還原如步驟5中描述的之前將其插入
- 將它們放置在網絡共享是為您的網絡,並指向此共享電腦中的應用如在步驟5中還原之前訪問
Before applying Universal Restore to a Windows operating system, make sure that you have the drivers for the new HDD controller and the chipset. These drivers are critical to start the operating system. Use the CD or DVD supplied by the hardware vendor or download the drivers from the vendor’s Web site. The driver files should have the *.inf, *.sys or *.oem extensions. If you download the drivers in the *.exe, *.cab or *.zip format, extract them using a third-party application (e.g. free 7-zip tool or any other).
Once you have the necessary drivers on hand, you need to place them to a location Acronis bootable media can access, for example:
- add them to the bootable media while creating it in the bootable media builder as described in step 3
- place them on a USB stick or an external drive and plug it in before applying Universal Restore as described in step 5
- place them on a network share that is accessible for computers in your network and point to this share before applying Universal Restore as described in step 5
|
|